当前位置:奔驰彩票APP下载>装饰新闻>装饰装修百科>装置暖气罩有何质量要求?

装饰装修百科

Encyclopedias

装置暖气罩有何质量要求? 来源:http://www.m6hosting.com 日期:2019-01-29 发布人:admin

装置暖气罩有何质量要求?
What are the quality requirements for the heating hood?
装置暖气罩的质量要求有以下几点:
The following points are required for the quality of the heating hood:
1)采用木方做骨架,外贴九厘板或大;体板做基层,木方依据设计拼制成格子,并应将暖气散热口地位留出。木方和基层板必需刷防火涂料。
1) Use wooden square as skeleton, and stick nine-centimeter board or large outside; use wooden square as base, make lattices according to design, and leave the position of heating and radiating outlet. Wood and base board must be painted with fire retardant paint.
2)在基层板上粘贴饰面板,实木木线,下边有踢脚板收边。
2) Adhering decorative panels, solid wood lines on the baseboard, with footboards at the bottom.
3)散热口局部边框爲实木,两头爲成品花格或百叶金属,木制或其他材质)。
3) The local border of the radiator is solid wood, and the ends are finished pattern or louver metal, wood or other materials.
4)百叶爲活动局部,并有卡子卡住,如暖气上有阀门应做活动反省口,活动门爲板制造实木收边。
4) The louvers are movable parts with clips. If there are valves on the heating, the louvers should be movable reflective ports, and the movable doors should be used to make solid wood edge harvesting for the boards.
装置暖气罩的质量要求有以下几点:
The following points are required for the quality of the heating hood:
1)采用木方做骨架,外贴九厘板或大;体板做基层,木方依据设计拼制成格子,并应将暖气散热口地位留出。木方和基层板必需刷防火涂料。
1) Use wooden square as skeleton, and stick nine-centimeter board or large outside; use wooden square as base, make lattices according to design, and leave the position of heating and radiating outlet. Wood and base board must be painted with fire retardant paint.
2)在基层板上粘贴饰面板,实木木线,下边有踢脚板收边。
2) Adhering decorative panels, solid wood lines on the baseboard, with footboards at the bottom.
济南装饰公司
3)散热口局部边框爲实木,两头爲成品花格或百叶金属,木制或其他材质)。
3) The local border of the radiator is solid wood, and the ends are finished pattern or louver metal, wood or other materials.
4)百叶爲活动局部,并有卡子卡住,如暖气上有阀门应做活动反省口,活动门爲板制造实木收边
4) The louvers are movable parts with clips. If there is a valve on the heating, the louvers should be movable reflective ports, and the movable doors should be used to make solid wood edge harvesting for the boards.
5)颜色分歧,外表平整、润滑,无开裂,无污迹,不露钉帽,无锤印,线角顺直、无弯曲变形;装饰线刻纹明晰、直顺,棱角、凹凸层次清楚,联系缝平均分歧,出墙尺寸分歧。
5) Different colors, smooth appearance, lubrication, no cracking, no stain, no nail cap, no hammer print, straight line angle, no bending deformation; decorative lines with clear, straight lines, clear edges, concave and convex layers, average difference of connection joints, different wall dimensions.
6)板面拼接在龙骨上,并在不显眼地位,纹理通畅,外表平整、紧密、无裂痕,同一房间花纹地位相反,拼花吻合、对称,装饰线接头、拼角处凹凸棱角对位精确,割向正确,接头平整、润滑、紧密、无缝隙。
6) The plate surface is spliced on the keel, and in a non-conspicuous position, the texture is smooth, the appearance is flat, compact and without cracks. On the contrary, the pattern in the same room is in the opposite position. The splicing is coincident and symmetrical. The concave and convex edges of the decorative wire joints and the splicing corner are precisely aligned, the cutting direction is correct, and the joints are smooth, lubricated, compact and seamless.
7)暖气罩应放线制造,以到达平整顺直外观光亮。
7) Heating hood should be fabricated by wiring in order to achieve smooth, straight and bright appearance.
综上所述有济南市木兰倾城装饰工程奔驰彩票APP下载提供,更多济南装饰公司知识,欢迎关注我们的网站:http://www.m6hosting.com谢谢支持!
In summary, all the above-mentioned Jinan Mulanqingcheng Decoration Engineering Co., Ltd. provides more knowledge of Jinan Decoration Company. Welcome to our website: http://www.m6hosting.com. Thank you for your support!

相关新闻

鲁公网安备 37010502001039号

必博彩票APP下载 宝马彩票APP下载 河北快3走势图 必博彩票APP下载 河北快3走势图 泊利彩票APP下载 宝赢彩票APP下载 必中彩票注册 爱拼彩票平台 奔驰彩票APP下载